Emergency Roof Tarp Service in Kennesaw, GA
How this is handled on a Kennesaw roof
The crew works to a written sequence: assess, document, quote, then build. Nothing changes order because a homeowner is not standing on the driveway — the foreman sends photographs at the start of the day, at midday, and at close, and those photographs are the record.
What you receive without being on site
Photographs of each stage, a note of anything found once the decking is exposed, and a written change order before any additional work proceeds. If something unexpected turns up, the crew stops and asks rather than absorbing it into the total.
What a tarp does and does not do
A tarp stops water from entering through the breach. It does not dry a saturated attic, stop a leak already travelling along a rafter, or substitute for repairing the decking underneath. That is why the useful question is not when the tarp goes on, but how quickly the permanent repair is scheduled after it does.
Fastening method decides how long a tarp survives. Staple-and-batten holds for days; ballasted edges with capped screws into the deck hold through wind. Anything tied to a gutter is temporary at best, because gutters were never designed to carry a lateral load.
How long can a tarp stay up?
Days, not months. Sun and wind degrade the material, and a tarp left through several storm cycles usually causes the abrasion damage it was meant to prevent.
Who should install it?
Someone working under the contractor's licence and carrying liability coverage. Roof work on a wet, damaged surface is where injuries and property claims originate.
The usual failure here is not the material, it is the transition detail at a penetration — which is why that detail gets checked first.
What the inspection establishes
Age is the least useful fact on a roof. What a proper inspection establishes is the condition of each slope, the state of the flashing at every penetration, and whether the decking is sound where the sheathing is exposed. Those three findings decide whether the work is a repair or a replacement.
How the scope is written
A usable scope names the material by product line, the underlayment, the number of squares, disposal, and whether permits are included. If any of those is missing, the number is not comparable to another quote and the difference will surface as a change order.
| Item | In the scope? | Why it matters |
|---|---|---|
| Material by product line | Yes | Warranty length follows the product, not the contractor |
| Underlayment type | Yes | Synthetic versus felt changes the weather window |
| Decking allowance | Yes | Hidden rot is the commonest change order |
| Permit and disposal | Yes | Otherwise they arrive as a separate bill |
Reading the report with a second contractor
Two quotes on the same roof should agree on what is wrong. When they do not, the disagreement is evidence: one of them has not looked at the decking or the flashing. A line-by-line comparison against the report resolves it faster than a conversation about price.
Sources
Warranty terms are published by the material manufacturer rather than the installer; GAF publishes its homeowner warranty documents. Insurance treatment of roof damage varies by policy and is set by the carrier.
Kennesaw specifics
Kennesaw sits at roughly 1,000 feet elevation, which puts it in the zone where ice damming shows up on north-facing slopes after a hard freeze. That detail changes the practical advice more than any general rule about roof age.